RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards necessitate conducting two types of validation.
The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.
The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.
Thus, validation is performed both prior to and following the assessment. The first type, assessment tool validation, is the focus here.
Breaking Down the Two Types of Assessment Validation
Defining Assessment Validation
As mentioned earlier and in our earlier blogs, validation is split into two parts: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, sometimes called pre-assessment validation, focuses on ensuring all unit requirements are met, in line with the first part of the clause, ensuring complete workbook compliance.
Post-assessment validation, in contrast, is about the implementation, requiring Registered Training Organisations to conduct assessments adhering to the Principles of Assessment and Rules of Evidence.
In this article, we will emphasize assessment tool validation.
How Assessment Tool Validation is Conducted
Having outlined the two types of validation, it’s time to dive into assessment tool validation.
When is Assessment Tool Validation Conducted?
Assessment tool validation seeks to ensure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.
You don't have to wait until your next 5-year validation schedule. Validate new resources right away to ensure they’re appropriate for student use.
Still, this isn't the sole reason for conducting this type of validation. Conduct assessment tool validation when you:
- updating your resources
- when new training products are added on scope
- reviewing your course against training product updates
- learning resources get identified as a risk during your risk assessment
The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.
How to Choose Training Products for Validation
Remember, this type of validation is to ensure all learning resources are compliant before use. All RTOs should validate all unit resources.
What You Need for Assessment Tool Validation
Study Resources
To conduct assessment tool validation, you will need the entire suite of your learning resources:
Mapping tool – start by investigating this document. It shows which assessment items meet unit requirements, facilitating quicker validation.
Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.
Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Validation Team
Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.
Together, your validation panel should possess:
Relevant vocational competencies and up-to-date industry skills for the unit being validated
Up-to-date knowledge and skills in vocational teaching and learning
One of these training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or the next version
Assessment validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool aids in both the validation process and documentation. It helps visualize how each assessment item meets each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It serves as documentation that you have validated your resources prior to student use.
ASQA does not provide a recommended or required template for assessment tool validation, but many templates can be found online. These tools often have validators review the tools as a whole to verify if they meet the principles of assessment.
Assessment Principles Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.
It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks click here Assessment Tools Rectification Recommendations
What do you Need to Check?
What to Inspect?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Key Principles of Assessment
Fairness – Are equal opportunities and access offered to everyone in the assessment process?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Does the assessment test what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield consistent results each time, regardless of the trainer? Will different assessors make the same decision on skill competence?
Rules of Evidence
Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence adequate to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?
Currency – Do the assessment tools reflect current units of competency and modern industry practices?
Despite being regularly covered in VET professional development and nationally recognised training, many tools still have issues with these requirements.
To avoid employing learning resources that leave unit requirements unmet, be sure to follow these guidelines:
Practice Your Teachings
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
nappy changing
bottle preparation, bottle-feeding infants, and cleaning equipment
solid foods preparation and feeding babies
respond appropriately to baby signs and cues
prepare and settle babies for sleep
monitor and support age-appropriate physical exploration and gross motor skills
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Notice the numbers. In the CHCECE032 example, one unit requirement asks students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby doesn’t meet the requirement.
Total or Not Competent
Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further
Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What information can be included in a work package?
Possible answers include:
Needed materials
Relevant expenses
Activity timeframe
Allocated roles and responsibilities
If an assessment item calls for several answers, specify the number of answers needed from a student. This ensures your assessment is reliable, and the evidence gathered is valid.
This is also true for assessment items with double-barrelled questions or those that require multiple answers at once. These can confuse students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the work area and select the most effective hazard control hierarchy.
Possible answers include, but are not limited to:
Weather conditions – work area isolation, engineering, PPE
Work area and ground conditions – elimination, isolation, engineering controls
People – isolation, engineering controls, administration
Structural hazards – substitution, isolation, engineering controls
Chemical hazards – isolating, use of engineering controls, administrative controls
Equipment or machinery – isolating, use of engineering controls, administrative controls
Avoiding double-barrelled questions makes it simpler for students to answer and for assessors to accurately judge student competence.
Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” However, such guarantees require you to wait for an audit to rectify noncompliance. This affects your compliance history, so it’s better to take a safe and compliant approach.